Dear All Brave who come forth and enter the abaton (for now) of what is … Construction Automation applied 🙂
This is the 3rd installment of our current journey; let’s see where it leads…
A. Related/selected news clippings collection:
- “Construction begins on CYBE’s first 3D-printed homes in the Carribean” – link
- “A scaled down medieval irrigation system 3D printed in concrete” – link
- “The world’s first 3D-printed parkour park is unveiled in Prague” – link
- “Concrete industry Brievengat ‘prints’ homes with 3D concrete printer” – link
- “Basingstoke start-up proposes tunnel-spraying bots” – link
- “Could Future Offices be 3D Printed by Robots?” – link
- “Biggest 3D-Printing Home Opportunity I’v ever seen…” – link
- “The ‘World’s Longest’ 3D-Printed Concrete Bridge Erected in The Netherlands” – link
- “Retrotechtacular: 3D-printed buildings, 1930s style” – link
- “Australia’s first ‘digital’ construction management degree to commence in 2022” – link
- “How a new construction technology could save two thirds of concrete” – link
B. Related current scientific literature collection:
- “Modelling the interlayer bond strength of 3D printed concrete with surface moisture“
- Gerrit Marius Moelich, Jacques Kruger, Riaan Combrinck – link
- “Incremental viscoelasticity at finite strains for the modelling of 3D concrete printing“
- Boumediene Nedjar – link
- “Developing Mix Proportions for Class C Fly Ash-Based Alkali-Activated 3D-Printed Concrete Mixtures“
- Fareh Abudawaba, Eslam Gomaa, Ahmed Gheni, Mohamed ElGawady – link
- “Effect of autogenous shrinkage on microcracking and mass transport properties of concrete containing supplementary cementitious materials“
- M.H.N. Yio, M.J. Mac, Y.X. Yeow, H.S. Wong, N.R. Buenfeld- link
- “Industry 4.0 in a project context: Introducing 3D printing in construction projects“
- Nils O.E. Olsson, Emrah Arica, Ruth Woods, Javier Alonso Madrid – link
- “Synergies on rheology and structural build-up of fresh cement pastes with nanoclays, nanosilica and viscosity modifying admixtures“
- Hugo Varela, Gonzalo Barluenga, Irene Palomar, Alberto Sepulcre – link
- “Evaluation of zeta potential of calcined clays and time-dependent flowability of blended cements with customized polycarboxylate-based superplasticizers“
- Ricarda Sposito, Matthias Maier, Nancy Beuntner, Karl-Christian Thienel- link
- “Bottom-up approaches to engineered living materials: Challenges and future directions“
- Sara Molinari, Robert F. Tesoriero Jr., Caroline M. Ajo-Franklin- link
- “3D Printing Mudrocks: Experiments in Validating Clay as a Build Material for 3D Printing Porous Micromodels“
- Franciszek Hasiuk, Chris Harding- link
- “The Algorithm and Application of Fast Surface Slice and Color Acquisition for Color 3D Printing“
- Yang Xiao, Yi Yang, Yi Wang- link
- “A Drone-Assisted 3D Printing by Crane Structures in Construction Industry“
- Fabio Parisi, Agostino Marcello Mangini, Maria Pia Fanti; Nicola Parisi- link
- “Short-duration near-nozzle mixing for 3D concrete printing“
- Nan Zhang, Ming Xia, Jay Sanjayan – link
- “Rheology and shrinkage of concrete using polypropylene fiber for 3D concrete printing“
- Mien V. Tran, Yen T.H. Cua, Chau V.H. Le – link
- “Numerical simulation of multi‐layer 3D concrete printing“
- Jon Spangenberg, Wilson Ricardo Leal da Silva, Raphaël Comminal, Md. Tusher Mollah, Thomas Juul Andersen, Henrik Stang – link
- “The effect of using polypropylene fibers on the durability and fire resistance of concrete“
- Hassan Suiffi, Anas El Maliki, Fatima Majid, Omar Cherkaoui – link
- “Pumping of Flowable Concrete: Analytical Prediction and Experimental Validation“
- Rami Khatib and Kamal H. Khayat – link
- “Cost–Benefit Analysis and Environmental Impact Assessment of 3D Printing Applications in Building Construction in Oman“
- Vineet Tirth, Syed Waheedullah Ghori – link
- “Influence of supplementary cementitious materials, curing conditions and mixing ratios on fresh and mechanical properties of engineered cementitious composites – A review“
- N.Shanmugasundaram, S.Praveenkumar- link
- “What Did You Add to My Additive Manufacturing Data? Steganographic Attacks on 3D Printing Files“
- Mark Yampolskiy, Lynne Graves, Jacob Gatlin – link
- “Evaluation of interlayer bonding in layered composites based on non-destructive measurements and machine learning: Comparative analysis of selected learning algorithms“
- Sławomir Czarnecki, Łukasz Sadowski, Jerzy Hoła – link
- “Digital fabrication of eco-friendly ultra-high performance fiber-reinforced concrete“
- Arun R. Arunothayan, Behzad Nematollahi, Ravi Ranade, Kamal H. Khayat, Jay G. Sanjayan – link
- “Experimental study on large-scale 3D printed concrete walls under axial compression“
- Xiaoyu Han, Jiachuan Yan, Mingjian Liu, Liang Huo, Junlin Li- link
- “Flexural Behavior of 3D Printed High-Strength Ductile Concrete Beams with Optimized Topology” (Thesis)
- Amadeu Malats Domenech – link
- “3D-Printed Biodigital Clay Bricks“
- Yomna K. Abdallah, Alberto T. Estévez- link
- “Cost–Benefit Analysis and Environmental Impact Assessment of 3D Printing Applications in Building Construction in Oman“
- Vineet Tirth, Syed Waheedullah Ghori – link
- “Investigation for Developing 3D Concrete Printing Apparatus for Underwater Application“
- Jun Pil Hwang, Hojae Lee, Hong-Kyu Kwon – link
- “Digital Fabrication Techniques for 3D Printing with Everyday Materials” (PhD Thesis)
- Michael L. Rivera – link
- “Numerical simulation of multi‐layer 3D concrete printing“
- Jon Spangenberg, Wilson Ricardo Leal da Silva, Raphaël Comminal, Md. Tusher Mollah, Thomas Juul Andersen, Henrik Stang – link
C. Extra points [for those that reached the post’s End!], some Conferences/Seminars to keep a (keen) eye out 🙂
- “European Military Additive Manufacturing Symposium” (link)
- “3D Printing for Production -AM 2021” (link)
- “Advanced Manufacturing Technology Conference 2021” (link)
- “Inside 3D Printing Seoul” (link)
- “Health and Safety in Additive Manufacturing” by TÜV SÜD (link)
As the (net savvy) Youth likes to say: “sharing is caring“!
Stay 3Dposted 🙂